• New Horizons on Maelstrom
    Maelstrom New Horizons


    Visit our website www.piratehorizons.com to quickly find download links for the newest versions of our New Horizons mods Beyond New Horizons and Maelstrom New Horizons!

[WIP] HMS Endymion 1797

Martes

Privateer
Staff member
Storm Modder
Storm Modeller
For better or worse, I have laid a keel for her today.

e_1.png

I can't say I have much information about her, except the drawing set (and one for Pomone) from NMM and a number of vague pictures, so it will include a considerable amount of guesswork, but I do find her attractive, ummm, in a French way. :rolleyes:
 
Oh yes, please! At the moment we have an "Endymion" class (and, for that matter, her French equivalent, the "Artemise" class). But they're basically retextured versions of the Constitution. A genuine "Endymion" class would be a welcome addition indeed!
 
I'll try to! :checklist

I intend to make her a little bit more detailed (and facecount-heavy) than the Indy, but it will be still pretty much the same array of spare parts.

What I would be grateful, though, that if anybody finds any more shots of her model or a sail plan... I can do with what I have, but more information never hurts.
 
Caught the shipbuilding bug, did you? One's just not enough. :p

Looking forward to seeing further progress!
 
One of my favorite frigates ever built! The French really should have built more sister-ships of the Pomone to act as frigate squadron flagships. It was an exceptionally good design, and must've been much more cost effective for mounting 24pdrs than the Forte and Egyptienne, as wonderful as those frigates were as well. Its interesting how even though the midsection is quite similar to other french frigates, the ends-while not obviously finer or fuller-are formed in a much straighter fashion compared to almost all other frigate plans I've seen. Take your time with her, I'm sure you'll do her justice.:dance

This model (though labeled Pomona)Pomona (1800)(?); Warship; Frigate; Fifth rate; 40 guns - National Maritime Museum is clearly the Endymion with built up bulwarks. I have more resources(including a sailplan of her fir-built sisters) I'll get to you in time.
 
The Russians noted that and produced 44 (Fourty Four !!! - if I got that correctly) copies over the first half of the 19th century. And one copy of HMS President just in case.

Take your time with her, I'm sure you'll do her justice.

I do hope so! I did allocate much more vertices to her hull form, that caused me much headache, but the progresses well enough.

Thanks for the model, it looks like a right one, and I will look forward for other pictures if you have them :)
 
I do hope so! I did allocate much more vertices to her hull form, that caused me much headache, but the progresses well enough.
How many polygons are you aiming for this time (for the whole ship), out of interest?
 
How many polygons are you aiming for this time (for the whole ship), out of interest?

It will be the same parts set, after all, just a bit more detailed hull.
I suspect I won't cross 150k, including rigging, maybe just a little. Indy has 137k.
 
While being mostly busy with converting the Indefatigable to unity with @Armada, I placed the main wale (thanks to model photos provided by @Captain Armstrong, as there was little indication of it's position and size on the drawings, and Liffey is structurally close, but not enough), and rails.

And, meditating on various drawings for bow details, I thought about what I am going to do with the figurehead.
It should depict Endymion, but... how? He's sleeping on all his statues, and we can't have the fastest frigate ever with a sleepy guy as a figurehead, can we? o_O

Yet, for all we know, there was some kind of statue there:
paint_lg.png

Anyway, not that I found out really what it was, but I scourged the net for some 3d scans of various marble statues and came out with a handy collection of classical Greeks, Romans and even a statue of a French lady from the times of Ancien Regime, sitting on a bench (I swear I saw a frigate with very similar figurehead).

And one real figurehead to boot, though, depicting an angel.

They are insanely detailed, since they are intended for 3d printing, but that can be quite easily dealt with (tested already, 300k polys -> 5k converts all right), and painted white as marble, I guess. Maybe I'll make a set sometimes.
 
And, meditating on various drawings for bow details, I thought about what I am going to do with the figurehead.
It should depict Endymion, but... how? He's sleeping on all his statues, and we can't have the fastest frigate ever with a sleepy guy as a figurehead, can we? o_O
:rofl
Maybe he can be FAST ASLEEP? :razz

Anyway, not that I found out really what it was, but I scourged the net for some 3d scans of various marble statues and came out with a handy collection of classical Greeks, Romans and even a statue of a French lady from the times of Ancien Regime, sitting on a bench (I swear I saw a frigate with very similar figurehead).

And one real figurehead to boot, though, depicting an angel.
That is seriously cool!!!
Are those freely available for reuse?
 
10,000 triangles of carved wood:

e_head_1.png
(well, it's more like 6k at the moment, but I am not nearly finished with that part)

Also, this ensemble will get backported to Indy. In time.
 
Last edited:
Good job, mania.....ehh, martes!

Any chance for close up of the figure head, I´m pretty interested how the conversion from 300k to 5k tris worked out. By the looks of it, unwrapping that thing isn´t going to be fun :p
 
I´m pretty interested how the conversion from 300k to 5k tris worked out

In this particular case it's 600k to 6k.

e_figurehead_comparison.png
Not ideal, but manageable, and, the best part, the process is fully automatic.
I am still figuring out the optimal settings for the decimation tool in Blender, that provides that effect, since there is a number of ways it can work.

unwrapping that thing isn´t going to be fun

Don't even mention that! o_O
In fact, I did not plan to. I thought to take the detailed model, bake a normal map texture from there and give it marble-white paint and some smoothing on top. A statue is a statue, after all.

To the lurking question why I chose this particular statue...
I found a photo of contemporary model of an older Endymion, two-decker, which featured a generic greek shepherd, and this one simply looks close enough.
 
Back
Top