In menus where items are listed like in the attached photo in a line, where you can navigate them with arrows (bad explanation, ik), the animation for switching the highlighted item is very slow (for the one in the photo, it takes about 30 seconds) and besides this, some buttons are just unresponsive. Before I installed the mod, this was worse, but it still is persistent mostly just on the save/load menus.
I guess this is just a bunch of combatibility issues. Buttons are also unresponsive as heck in those menus.
Sorry if this is badly described, any help would be greatly appreciated though.
Some specs from dxdiag:
Operating System: Windows 10 Pro 64-bit (10.0, Build 14393) (14393.rs1_release.161220-1747)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 11/08/16 18:32:22 Ver: 05.0000C
Processor: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16318MB RAM
Page File: 4211MB used, 14539MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
Dxdiag Version: 10.00.14393.0000 64bit Unicode
Card name: NVIDIA GeForce GTX 1070
Manufacturer: NVIDIA
Chip type: GeForce GTX 1070
DAC type: Integrated RAMDAC
Device Type: Full Device
Device Key: Enum\PCI\VEN_10DE&DEV_1B81&SUBSYS_33011462&REV_A1
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 16279 MB
Dedicated Memory: 8119 MB
Shared Memory: 8159 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: Philips 227EL
Monitor Id: PHLC079
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
I guess this is just a bunch of combatibility issues. Buttons are also unresponsive as heck in those menus.
Sorry if this is badly described, any help would be greatly appreciated though.
Some specs from dxdiag:
Operating System: Windows 10 Pro 64-bit (10.0, Build 14393) (14393.rs1_release.161220-1747)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 11/08/16 18:32:22 Ver: 05.0000C
Processor: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16318MB RAM
Page File: 4211MB used, 14539MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP
Microsoft Graphics Hybrid: Not Supported
Dxdiag Version: 10.00.14393.0000 64bit Unicode
Card name: NVIDIA GeForce GTX 1070
Manufacturer: NVIDIA
Chip type: GeForce GTX 1070
DAC type: Integrated RAMDAC
Device Type: Full Device
Device Key: Enum\PCI\VEN_10DE&DEV_1B81&SUBSYS_33011462&REV_A1
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Device Problem Code: No Problem
Driver Problem Code: Unknown
Display Memory: 16279 MB
Dedicated Memory: 8119 MB
Shared Memory: 8159 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: Philips 227EL
Monitor Id: PHLC079
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
