I am having the same problem too. Here's my data:
------------------
System Information
------------------
Time of this report: 12/4/2004, 15:37:42
Machine name: ANGUS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.`040803-2158`)
Language: English (Regional Setting: German)
System Manufacturer: `Hewlett-Packard`
System Model: HP d330 uT(DC579AV)
BIOS: 786B2 v1.11
Processor: Intel® Pentium® 4 CPU 2.40GHz (2 CPUs)
Memory: 504MB RAM
Page File: 265MB used, 964MB available
Windows Dir: C:WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
D

iag Version: 5.03.2600.2180 32bit Unicode
---------------
Display Devices
---------------
Card name: Intel® 82865G Graphics Controller
Manufacturer: Intel Corporation
Chip type: Intel® 82865G Graphics Controller
DAC type: Internal
Device Key: EnumPCIVEN_8086&DEV_2572&SUBSYS_12BC103C&REV_02
Display Memory: 96.0 MB
Current Mode: 1024 x 768 (16 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.3865 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 7/1/2004 12:18:58, 37951 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 7/1/2004 12:26:16, 724221 bytes
Device Identifier: {`D7B78E66-6632`-`11CF-957C`-B632A3C2CB35}
Vendor ID: 0x8086
Device ID: 0x2572
SubSys ID: 0x12BC103C
Revision ID: 0x0002
Revision ID: 0x0002
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
any help would be highly appreciated.